External Cd Drive Continuously Spinning Up

On this page, we collected 4 practical fixes for helping you resolve theHard Drive Not Spinning Uperror. If you are having a similar issue on your computer hard drive, refer to anyone method listed below to make your drive work now:

Workable Solutions Step-by-step Troubleshooting
Fix 1. Check Power Surge Figure out which component is damaged > Replace the components with a new one...Full steps
Fix 2. Troubleshoot PCB Take PCB out of the hard drive > Use probes to touch both ends of the diode...Full steps
Fix 3. Fix Disk Head Remove the lid of hard drive > Check if the disk head is on the platter > Move disk head back...Full steps
Fix 4. Fix Spindle Motor check if the spindle motor is seized or damaged > If yes, swap the platter...Full steps

Hard Drive Not Spinning

When you plugged your hard drive into your computer, you didn't hear the familiar spinning sound that indicates the hard drive is working. Instead, you got no spinning sound and the hard drive acted like it's not plugged in at all. Hard drive not spinning is one of the situations that mean your hard drive is not working. That could happen to an internal hard drive or an external hard drive from Seagate, Western Digital, and more. Honestly speaking, when an (external) hard drive is not spinning, it's highly likely there are some issues with the firmware on your disk. In addition to minor matters like a heavy power surge and insufficient power supply, there are other serious causes that may result in the hard drive not spinning.

Possible Causes

  • Electrical failure on the PCB (Printed Circuit Board)
  • The read/write head stuck on the platter
  • Seizure of the platter motor

Symptoms

When your hard drive is not spinning, your computer won't recognize it and you won't be able to recover the data from the hard drive using data recovery software until you fix it.

When your hard drive is not spinning, you are recommended to send your device to a professional for manual repair. If you want to know more details about how to fix a hard drive that is not spinning, read on to do some troubleshooting for your hard drive and learn how to cope with the problem.

How to Fix Hard Drive Not Spinning Up

You can only get the right solution until you find the specific reason that causes your hard drive to fail to spin up. Thus, it's necessary to do some troubleshooting steps first.

Option 1. Check the Power Surge/Supply

If there is a burning smell on your hard drive, your hard drive may suffer from a power surge, which can damage the PCB on your hard drive. In this case, you need to further figure out which component is damaged and replace the component with the one on the same and functional PCB. If there is no burning smell on your disk, you can check the power supply simply by connecting your hard drive to your computer using another cable or connecting your hard drive to another computer. If "hard drive not spinning" remains, It's probable that your hard drive has some mechanical or electrical issue.

Option 2. Troubleshoot PCB

A hard drive's PCB, or Printed Circuit Board, allows electricity to pass between various components that allow the hard drive to function. The main components on a PCB include Main Controller IC (works like the CPU), Motor Controller Chip, Cache Chip, ROM/BIOS, Board Number, and TVS Diodes. The burning of any of these components will result in HDD failure, including the hard drive not spinning.

Among these parts, diodes are the most commonly failing pieces on PCB. When a diode is shorted out, it will cause the hard drive to be burnt. Thus, test diodes first. Here you will need a T8 screwdriver and a multimeter.

Step 1. Take the PCB out of the hard drive with the help of the screwdriver.

Step 2. Use the two probes on the multimeter to touch both ends of the diode.

Step 3. If the multimeter makes a beeping sound and displays a number near zero. There is a short on the diode.

Step 4. If you only want to recover data from the hard drive and discard it, you can remove the diode. While if you want to continue using the device, you need to replace the diode with the one from a functional PCB which is the same as your original one.

Notice:

  • There are two types of boards: external/accessible firmware and embedded firmware. The latter is difficult to remove. Thus, you may need help from professionals.
  • Diodes are rectangular and black components that are generally marked as D + [number].
  • The removal of the diode requires heat, which means you need specialized tools. Don't remove the components bare-handed, which may result in physical damage to your PCB.
  • Due to the different firmware information stored on PCB, it won't work if you replace the problematic PCB with an identical one.

Hard Drive PCB

However, if there is an obvious brunt component on the PCB, don't make any further operations on the PCB and sent it to a professional directly.

Option 3. Fix Stuck Disk Head

Problematic disk head will also lead to serious issues like hard drive clicking and the one in discussion: hard drive not spinning. When a disk is not in use, the disk head should park on the landing zone. Thus, if you remove the top cover of the hard drive and see the disk head stuck on the platter, that is the culprit of why your hard drive won't spin. (There are videos available teaching you how to fix a stuck head. You can follow to finish the process.)

Step 1. Use a fitting screwdriver to remove the lid of the hard drive.

Step 2. If you see the disk head is on the platter, that's where the problem is. To solve the problem, you need to move the disk head back to the parked position using a hook or something alike and a screwdriver.

Step 3. Use the screwdriver to turn the screw in the center of the spindle counterclockwise. You need to pull the head with the hook while you reduce the stress of the platter.

Step 4. Put the lid back on and connect the hard drive to your computer. Generally, the hard drive will spin up and work again.

Notice:

  • Make sure you perform the operation above in a clean environment.
  • Other than the screws on the side, there is always a screw under the sticker, which you can find by moving your finger across the lid.

Hard Drive Structure

Option 4. Fix Seized Spindle Motor

When a hard drive works properly, the platter in your hard drive will spin with the help of the spindle motor. If the spindle motor is seized or the spindle itself is damaged, your hard drive won't spin up when plugged in. Usually, a platter swap is performed when the spindle or motor is physically damaged.

Performing a platter swap demands professional tools and a clean environment. Therefore, you are highly recommended to send your hard drive to professionals for manual repair. If you want to try it yourself, you can search the videos on how to perform a platter swap on Youtube and follow the video strictly to have a try.

These are the common causes and solutions of hard drive not spinning. Hope one of them is useful to you.

Extra Tip: How to Recover Data from a Hard Drive

Sometimes, after fixing the hard drive not spinning up, you might notice that data loss occurred on your disk. In this case, the best solution is to apply free data recovery software - EaseUS Data Recovery Wizard Free to get back your lost files. Here are the features of this tool:

The following guide shows you how to recover data from a hard drive with the help of EaseUS Data Recovery Wizard.

Step 1.Launch EaseUS Data Recovery Wizard in Windows 11/10/8/7 and choose the place where you lost data. Then, click "Scan".

select a location to scan

Step 2. After the scan, use the file format filter on the left or upper right corner to find the files you need. Then, you can click the "Preview" button or double-click a file to preview its content.

Choose files to recover

Step 3. Click the checkbox next to the file and click "Recover" to get back the lost data to a secure place.

Recover lost data

The Bottom Line

In common data loss situations like deletion, formatting, and OS crash, you can easily recover your files using data recovery software. However, in a situation like a hard drive not spinning, no data recovery software can help before your device can be recognized by the computer. What I want to express is that you should back up your hard drive regularly, which is the safest way to avoid complete data loss. Whether you prefer manually copying files or using free backup software, taking action is the most important.

neehout1936.blogspot.com

Source: https://www.easeus.com/computer-instruction/usb-hard-drive-fails-to-spin-up.html

0 Response to "External Cd Drive Continuously Spinning Up"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel